You are now viewing the owner's manual for your Broan Ventilation Hood, model number .This guide is designed to help you understand the features, functionalities, and maintenance requirements of your Ventilation Hood. Remember, your Broan Ventilation Hood is not just an appliance; it's an investment in your daily comfort and convenience. Please take a moment to familiarize yourself with this manual to ensure you get the most out of your Broan Ventilation Hood.

background image

NDK358 SERIES 
NON-DUCT FILTER KIT

For use with Broan AP Series or RP2 Series 
range hoods.

ALUMINUM

FILTER

NON DUCT

FILTER

NON DUCT

FILTER TABS

ALUMINUM FILTER

FINGER RING

3.  Lift the hood up and over the 4 THREADED 

STUDS. Secure hood to HOUSING with 4 HEX 
NUTS (provided).

MOUNTING

SCREWS

HEX

NUTS

HOUSING

ALUMINUM

FILTERS

THREADED

STUDS

4.  Remove ALUMINUM FILTERS from hood  

(if previously installed).

5.  Slide ALUMINUM FILTERS beneath TABS on NON 

DUCT FILTERS. Make sure FINGER RING faces 
outward. Install filters into hood with ALUMINUM 
FILTERS facing outward.

Replacement Filters:
• Non-Duct Filter ...............................................88F
• Aluminum Filter (Qty. 2) ..................................97017455
• Aluminum Filter with Microban

®

 (Qty. 2)..........97017456

9"

CENTER

LINE

HOUSING

MOUNTING

SCREWS (4)

WOOD SHIMS

(recessed-bottom

cabinets only)

CABINET FRONT

CABINET
BOTTOM

13

15/16

" 

(30" hood)

16

15/16

" 

(36" hood)

13

15/16

" 

(30" hood)

16

15/16

" 

(36" hood)

1½"

1. 

Screw the 4 MOUNTING SCREWS (provided) into 
the CABINET BOTTOM where shown. Recessed-
bottom cabinets require WOOD SHIMS to be 
secured to the cabinet bottom before attaching the 
mounting screws.

VERTICAL DUCT

KNOCKOUT

2.  Remove VERTICAL DUCT KNOCKOUT from hood.