You are now viewing the owner's manual for your Traulsen Freezer, model number .This guide is designed to help you understand the features, functionalities, and maintenance requirements of your Freezer. Remember, your Traulsen Freezer is not just an appliance; it's an investment in your daily comfort and convenience. Please take a moment to familiarize yourself with this manual to ensure you get the most out of your Traulsen Freezer.

background image

Project

Quantity

Item #

Model Specified:

CSI Section 11400

SECTION

7-4

TRAULSEN
4401 BLUE MOUND RD.

FT. WORTH, TX 76106

PHONE 1 (800) 825-8220

FAX-MKTG. 1 (817) 624-4302

Website: www.traulsen.com

The R-Series Fast Freezer line is designed to allow on premise, small-
scale fast freezing.  To accomplish this, a -20 degree F air temperature
is utilized, along with sufficient air movement to promote rapid heat trans-
fer from the product. These models are supplied standard with all the
Traulsen top of the line features, such as balanced refrigeration sys-
tems, next generation INTELA-TRAUL

®

  controls and stainless steel

exteriors and interiors.

Reach-In Fast Freezer Models/

Self-Contained

Approval: __________________________________

Model RFF232WUT-FHS

Listed by Underwriters Laboratories Inc., to
U.S. and Canadian safety standards and
Listed by NSF International.

One, Two  & Three Section Reach-In Models - 32" Deep

R

SERIES

Stainless Exterior

& Interior

Standard Product Features

• Stainless Steel Exterior & Interior
• INTELA-TRAUL

®

 Microprocessor Control System

• Balanced, Self-Contained Refrigeration System Using

R-404A Refrigerant

• Full or Half Length Stainless Steel Doors With Locks
• Self-Closing Doors With Stay Open Feature At 120 Degrees
• Guaranteed For Life Cam-Lift Hinges
• Guaranteed For Life Horizontal Work Flow Door Handle
• Standard Door Hinging: 132W = Right, 232W = Left/Right,

332N = Left/Right/Right (other hingings available)

• Automatically Activated Incandescent Lights
• Stainless Steel Breaker Caps
• Three Chrome Plated Adjustable Shelves Per Section,

Supported On Shelf Pins (installed at the factory)

• Automatic Bottom Mounted Electric Condensate Evaporator
• Magnetic Snap-In Door Gaskets
• Gasket Protecting Stainless Steel Door Liner
• Controllable Anti-Condensate Door Perimeter Heaters
• Thermostatic Expansion Valve Metering Device
• Stainless Steel One-Piece Louver Assembly
• 9' Cord & Plug Attached (one section models only)
• Set of Four (4) 6" High Adjustable Stainless Steel Legs
• One Year Parts And Labor Warranty
• Two Year Control Warranty (parts and labor)
• Five Year Compressor Warranty

INTELA-TRAUL

®

Equipped!

1-Section Full Length Door Model

RFF132WUT-FHS

2-Section Full Length Door Model

RFF232WUT-FHS

3-Section Full Length Door Model

RFF332NUT-FHS

1-Section Half Length Door Model

RFF132WUT-HHS

2-Section Half Length Door Model

RFF232WUT-HHS

3-Section Half Length Door Model

RFF332NUT-HHS

Options & Accessories

• Stainless Steel Finished Back With Rear Louvers
• Re-Hinging Feature For Door(s)
• No. 1 Type Tray Slides To Accommodate either (1) 18" x 26"

or (2) 14" x 18" Sheet Pans, Adjustable To 2" O.C.

• No. 2 Type Tray Slides To Accommodate (1) 18" x 26" Sheet

Pans, Adjustable To 2" O.C.

• No. 3 Type Tray Slides To Accommodate (2) 12" x 20" Steam

Table Pans, Adjustable To 2" O.C.

• No. 4 Type Tray Slides To Accommodate (1) 18" x 26" Sheet

Pans (chrome rod type, equips 1/2 section)

• Universal Type Tray Slides To Accommodate Either (1)

18" x 26" or (2) 14" x 18" Sheet Pans, or (2) 12" x 20" Steam
Table Pans, Adjustable To 4" O.C.

• Additional Chrome Plated Shelves
• Locking Hasps (padlocks supplied by others)
• Stainless Steel Shelves In Lieu of Standard Chrome Plated
• Kool Klad Exterior Laminate Decor
• Set of Four (4) 6" High Casters In Lieu of Legs
• Set of Four (4) 4-5/8" High Casters In Lieu of Legs
• 4-1/2" High Stainless Steel Base In Lieu of Legs
• 6" High Stainless Steel Kickplate (for use with standard legs)
• Prison/Correctional Facilities Options
• Remote Applications (see spec sheet 12-2 for more details)
• Two Year Service/Labor Warranty Available