Bringing Balance to Life and Washer Dryers: A DIY Guide to Leveling Up Your Installation Skills
Owning a washer dryer combo offers the ultimate convenience, saving you time, effort, and space. But, without proper installation, you could be looking at vibrations louder than an orchestra’s percussion section, water leaks turning your home into an improvised aquarium, and more crisis situations than your favourite superhero movie. So let’s break it down together. I'm here to share my personal tips and tricks on how to level your washer dryer combo, because a balanced machine means a balanced life!
Get Ready for Action
Before we dive headfirst into those tricky instructions, let’s remember one thing: you are not a superhero. Don't try to perform this mission solo - a washer dryer combo weighs more than your Thanksgiving turkey. It would be best not to end up as a human pancake under that big metal box. Recruit a friend, spouse, or neighbor (bonus points if they owe you a favor) to help you out.
Also, bear in mind that each washer dryer combo is a unique beast. Don’t forget to consult the manufacturer’s guidelines that came with your unit and keep them nearby as a reference.
Gather Your Tools: Your DIY Arsenal
• Level: You need this ice-cold straight guy to help keep things leveled. No level at hand? There’s an app for that. Seriously, most smartphones come with a built-in level tool.
• Pliers or Adjustable Wrench: Needed to adjust the legs of the washer dryer.
• Patience: We both know this isn’t strictly a tool, but trust me, it might be the most critical component you’ll need.
Enter the Arena: Your Installation Spot
Before we start tinkering with the equipment, let's focus a moment on the battlefield - or rather, your laundry room. The floor needs to be as smooth and level as possible. Check for any bumps or dents and make sure you take care of them. Your washer dryer combo isn’t a fan of rollercoasters.
Step-by-Step: Operation Combo Balance
1. Make the First Move
Move your washer dryer combo close to its final location. Don’t put it in place just yet - you’ll need some room to maneuver around.
2. Check Initial Level
Place the level on the top of the machine. Check from front to back and side to side. Is the bubble centered? No? That's what we're here to fix.
3. Adjust the Legs
Get your pliers or adjustable wrench and start on those legs. Every machine is unique, but generally, clockwise tightens and moves the leg up, and counterclockwise loosens and moves it down.
4. Check the Level Again
After adjusting, check the level again and repeat step 3 until the level's bubble is centered. One important note: always adjust the front legs before the rear ones. Your washer dryer combo probably has self-adjusting back legs, adding extra warrior power to tackle unbalanced loads.
5. Wiggle Test
Give your newly leveled unit a gentle shake. If it’s still moving, tinker a little more, adjust as needed, and then test again.
6. Final Position
Carefully move your companion appliance into its permanent home. Check once more with your level - the moving might have shifted things a little. If necessary, go back to step 3 and adjust again.
And voila! Your stage is set. You've successfully managed to level your washer dryer combo.
A Debriefing for the Heroes: Maintaining the Balance
Congratulations! You've leveled up in the game of laundry installation. Your washer dryer combo is ready for its first mission. But remember, even superheroes need routine check-ups. Check that level occasionally, especially if you notice the machine starting to shift, wobble, or make unusual sounds.
There you have it - leveling a washer dryer combo might not be as exciting as saving the world. But think about it: every time you wash your clothes in a machine perfectly balanced by your own hand, in a way, you'll be saving your own world. And I call that a victory.